Re: FC storage
This is a normal behavior. Host is trying to communicate with a storage subsystem and get the access to mounted datastores back. If You want to shutdown and do not use the storage array anymore for...
View ArticleRe: FC storage
Yes, but this does not accept other connections. Only restarting the host helps.
View ArticleRe: ERROR: Task failed on server: Module ‘CPUID’ power on failed.
What license do you have? found this in your logs Current license or ESXi version prohibits execution of the requested operation
View ArticleRe: IPV6 create vm
I think I understand your problem but, it seems more a problem with your Guest OS (Linux) than a VM's NIC issue.If you have only one NIC configured in the VM with a portgroup, then you have to...
View ArticleRe: issue getting folder information
Hi LucD, That worked but first tab shows blank, before, I used to get the list of all VMs in first tab. now it is shows blank.
View ArticleRe: send Alt-Printscreen key combination to a virtual machine.
Hi, PMJI, but..You can use other keys for mapping. Say, 'control + M', you can click 'control' and the press 'm' key in the drop-down list. You can also send 'F15' via Virtual Machine -> Send Key...
View ArticleRe: FC storage
And this is an expected behavior too. Hostd is mainly responsible for VMs management but for others activities where host is involved too.You can try to restart only hostd but it's not always safe to...
View ArticleRe: Marking all disk non SSD
Hi, I suppose you are referring to this KB: VMware Knowledge BaseLet's see, the problem is when you are already using the affected Datastore (marked as HDD).Usually when you add new storage, you check...
View ArticleRe: Настройка vlan на Exsi
У вас есть целый vSwitch0 на котором живет сеть управления, т.е. Management Network (VMkernel Port). Зачем вы создали VMkernel Port на vSwitch1?Если у Вас только один хост, зачем Вам порт групп для...
View ArticleRe: ESXi vswitch - Redirect external DHCP Server from one Ethernet to another
@ammannlu Logically what you are doing should work, as an uplink is also a port which has more bandwidth than normal ports, thats why wireshark or netmon captures would show what is running underneath.
View ArticleRe: M.2 NIC adapter from Innodisk.
If it's not supported will be hard this will work.Also you are telling us that you have a Dell OptiPlex 7050 MINI, which is a Dell workstation so, less options that it will work as an ESXi host (if...
View ArticleRe: Unable to deploy NSX-v 6.4.0 controllers
Hi Mike, yes, no worries and thanks for your reply. Yes, i've solved my issues. It was related to datastore "performances" . I've tried to use another one and i have been able to deploy all...
View ArticleRe: What is the structure of input Json
What are you talking about?You will have to provide us the json file...
View ArticleRe: Link aggregation in ESXi 6.0U3 (free)
Your physical switch ports should be trunk with all vLANs available which would be passing thru that vSwitch. once you add physical NICs of the servers in uplink active/active model your work is done....
View ArticleRe: FATAL: configuration file "/storage/db/vpostgres/postgresql.conf"...
Did You replace certificates on vCSA recently? Or changed hostname or IP address?What is the output of this command run in shell of vCSA?cat /etc/vmware/deployment.node.type
View ArticleRe: Repoint vCenter Server 6.7 between EXternal PSC within a site show a error.
This is time issue. Time between vCenter and PSC is out of sync.
View ArticleAlarm on VCSA 6.5 on VM removal
Dears, I would like to set an Alarm if someone removed a VM, however I am not able to set the triggered alarm VM being removed or VM deleted as it does not exist. anyone faced a similar problem? on...
View ArticleRe: Snapshot Persistence
Hi, In this thread the one that used the word "fragile" is me Snapshots are great, I use them all the time. They have saved me many times and yes I also use them when testing software (including...
View ArticleRe: a problem in installing ubuntu 16.04.5 on the workstation pro 15
I have solved the problem just now by installing previous version of workstation pro,maybe there are some compatibility problems with workstation pro 15.However thanks for your help again!
View Article