Re: Register VMs in a datastore in the vCenter inventory
Try it like this $Cluster = "MyCluster" $DatastoreName = "MIRROR*" $VMFolder = "DR_Folder" $ESXHost = Get-Cluster $Cluster | Get-VMHost | select -First 1foreachforeach($Datastore in (Get-Datacenter...
View ArticleRe: Invalid cisco switch port syntax
Dylan whatever works for you. I think as long as you are not getting any failures you should be ok. I think VMware justs hopes that their workbench is working to a point where you can get a good solid...
View ArticleAdd another processor to host ??
We have a site with a 710 host. During our discussions, someone mentioned adding another CPU to the host.My question is, if I nstall an additional CPU, will I have to reinstall ESXi ? we are running...
View ArticleRe: VCAP-DCA4 Results delay...
NO Not yet ...received..wat about you..did you received ???
View ArticleRe: VCAP-DCA4 Results delay...
Linus, i guess none of the three have received the result...
View ArticleRe: Error: VMware ESX and VMware ESXi hosts are not supported with vSphere...
No its not. You're supposed to use two different IPs. The IP of the ESXi host goes on the top line and thats why you get prompted for the SSL certificate. Then the last line is the IP of the VM...
View ArticleRe: ESXi 5.1 + Apple Mac Pro = fan speed...
Hi patpro, I can successfully boot ESXi 5.1 on my MacPro5,1 without the fans ramping up. Can you please try resetting the System Management Controller (SMC) on your Mac Pro by following the...
View ArticleRe: Apply pool to certain zero clients, can it be done?
Yeah, that seems like the best way. Use the AutoConfig in the Teradici Management Console or add the zero clients to groups manually, then specify the pool in the profile properties.
View ArticleRe: Question about implementing a distributed switch in vCenter 5.1 for an...
You can mix the VSS and VDS in a single cluster. Where this usually becomes an issue is for vMotion of workloads, as in most cases your VDS workloads are limited to hosts on the VDS. Same goes for the...
View ArticleNo puedo conectar por telnet al puerto 902
Hola a todos,Tengo el siguiente problema: Intento conectar por telnet al puerto 902 y no funciona.esto es lo que hago: > telnet 192.168.1.100 902Trying 192.168.1.100... telnet: Unable to connect to...
View ArticleRe: VCAP-DCA4 Results delay...
Randy Becraft, the Senior Program Manager on the VMware Certification Team, has done all the investigation he can do at this point and has set a meeting Monday morning (San Francisco time) with the...
View ArticleRe: VMs on SATA RAIDs
This is a pretty good post on how to understand RAID penalty. http://theithollow.com/2012/03/21/understanding-raid-penalty/ You are pushing the envelope on 12 SATA disks. I usually calculate 80 IOPS...
View ArticleRe: Problem with Microsoft Failover Cluster Shared Disks
Thanks for the reply, Ralf. The NMP had been set to MRU, but I've also tried Fixed as well as manually doing fixed AND disabling non-optimized path, leaving only 1 possible way to the LUN. According to...
View ArticleRe: ESXi 5.x on new Apple Mac Mini 6,2 Late 2012 *NOT* working
Here's a possible workaround... Very early in the boot process, a prompt appears in the bottom-right corner of the screen to press Shift+O to edit boot options. At that time, press Shift+O and you'll...
View ArticleRe: NetApp FAS2040 Space Distribution for vSphere 5
I'd tend to agree with vmroyale - I prefer one aggr to avoid additional parity and dparity disk loss. As long as your OnTAP supports that many disks (I can't recall the max/min values for 7.34 and older).
View ArticleUpdate VMWare Tools failed with sysprep error ?
Hi, We have just updated ESXi Hosts to vSphere 5.1. when we attempt to upgrade VMWare Tools, we get the following error message for a number of VMs++++++++++++++++++++++++++++++Remediate entity...
View ArticleRe: Making a copy of a VM
Since you have already copied the vmware bundle with different name, all that you need to do is Drag the virtual machine package icon or the virtual machine's #.vmx file to the library window. When...
View ArticleCustom events not formatting correctly with WSSDK 5.1
Hello, I'm registering an extension using the VMware vSphere Web Services SDK. The custom tasks and faults I've defined are displayed correctly on the VMware vSphere Client, as well as the vSphere Web...
View Article